Cart

Unlocking potential with the best learning and research solutions

I want this title to be available as an eBook

Advanced Structural Materials—2013

Volume 1611

£65.99

Part of MRS Proceedings

Editor: Hector A. Calderon, Instituto Politécnico Nacional, Mexico

F. J. Baldenebro-Lopez, J. H. Castorena-Gonzalez, J. I. Velazquez-Dimas, J. E. Ledezma-Sillas, R. Martinez-Sanchez, J. M. Herrera-Ramirez, J. G. Carrillo, J. A. Moo-Tec, R. A. Gamboa, D. A. Pool Ventura, R. H. Cruz-Estrada, J. A. Delgado-Álvarez, J. G. Perea-Zurita, A. Antonio-Morales, C. González-Rivera, M. A. Ramírez-Argáez, Francisco Fernando Roberto Pereira, Maria Goretti Ferreira Coutinho, Bruno Moura Miranda, Carlos José de Araújo, Jackson de Brito Simões, Jorge Otubo, R. H. Rafful, B. J. Dzul, Nancy G. González-Canché, M. Hernández-Hernández, W. F. Cruz-Mendez, M. Vlasova, M. Kakazey, E. A. Juarez-Arellano, P. A. Márquez Aguilar, R. Guardian Tapia, V. Stetsenko, A. Bykov, E. Andrievskaya, A. Ragulya, Marcela Karmazínová, Jindrich J. Melcher, N. Koshukhova, Igor Zhernovsky, Konstantin Sobolev, E. F. Kuznetsova, G. M. Sobolev, Valeria Strokova, Mikhail Lebedev, Irina Potapova, Diana M. Marulanda, Jair G. Cortés, Marco A. Pérez, Gabriel García, Nadira Mathura, Duncan Cree, Ryan P. Mulligan, M. Morua, Victoria Nelubova, Alla Cherevatova, Nataliya Altynnik, Yulia Ogurtsova, Aleksey Maksakov, Marina Kozhukhova, R. Ordonez, A. J. DeArdo, C. Isaac Garcia, Sergey Petrunin, Viktor Vaganov, F. C. Robles Hernandez, H. A. Calderon, D. Barber, A. Okonkwo, R. Ordoñez Olivares, V. Hadjiev, C. Rodríguez, M. Hinojosa, J. Aldaco, A. Cázares, Sun Hwi Bang, Sam Chun, Adrian Highower, E. V. Voitovich, A. V. Cherevatova, H.-B. Fisher, W. S. Gónzalez-Gómez, J. May-Crespo, P. Quintana, A. May-Pat, F. Avilés, J. J. Alvarado-Gil, B. O. Ortega, A. F. Miranda Pérez, R. Sandström, I. Calliari, F. A. Reyes Valdés

View all contributors

Date Published: February 2015
availability: Out of stock in print form with no current plan to reprint
format: Hardback
isbn: 9781605115887

Rate & review

£ 65.99
Hardback

Out of stock in print form with no current plan to reprint

Unavailable Add to wishlist

Looking for an inspection copy?

This title is not currently available on inspection

Description

Contents

Resources

Courses

About the Authors

This volume is a compilation of papers that were presented at Symposium 4A: 'Advanced Structural Materials' of the XXII International Materials Research Congress, organized in collaboration with MRS, which was held from August 11 to 15, 2013 in Cancún, Mexico. The symposium was devoted to fundamental and technological applications of structural materials, and continued the tradition of providing a forum for scientists from various backgrounds with a common interest in the development and use of structural materials to come together and share their findings and expertise. The 'Advanced Structural Materials' symposium has been held for the last nineteen years with the objective of presenting overviews and recent investigations related to advanced structural metallic, ceramic and composite materials. The topics include innovative processing, phase transformations, mechanical properties, oxidation resistance, modeling and the relationship between processing, microstructure and mechanical behavior. Additionally, papers on industrial application and concrete are included.

Customer reviews

Not yet reviewed
Be the first to review

Log in to review

Review was not posted due to profanity
×

, create a review

(If you're not , sign out)

Please enter the right captcha value

Please enter a star rating.

Your review must be a minimum of 12 words.

How do you rate this item?

Reviews must contain at least 12 words about the product.

×

Product details
- Date Published: February 2015
- format: Hardback
- isbn: 9781605115887
- length: 197 pages
- dimensions: 236 x 157 x 15 mm
- weight: 0.43kg
- contains: 126 b/w illus. 45 tables
- availability: Out of stock in print form with no current plan to reprint
Table of Contents
1. Prediction model of deflections in PET fiber reinforced concrete beams
2. Novel sandwich composite with recycled multilayer carton core and aluminum facings
3. Improvement on mechanical properties of a particle board made of recycled material based on Tetra Brik®
4. Mathematical modeling of the fluid flow in a mixing device for melting/dissolving solid particles in a liquid alloy
5. Study of a Cu-Al-Mn shape memory alloy produced by plasma melting followed by injection molding
6. Influence of the reprocessing by plasma melting and injection molding on the thermomechanical properties of a Ni-Ti SMA manufactured by VIM
7. Characterization of energy absorption of two armor grade composites arrangements base on aramid and polypropylene
8. Adhesion and tensile properties of a novel fiber-metal laminate based on polypropylene reinforced with aramid fibers
9. Mathematical modeling of aluminum degassing by the impeller injector technique validated by a physical modeling
10. Layer-by-layer laser synthesis of composite ceramics in the system Al-Ti-Y-O
11. On problems of characteristic and nominal values of steel yield strength and their influence on design resistance of steel structural members
12. The effect of silica polymerization in fly ash on the strength of geopolymers
13. Self-consolidating green concrete based on metakaolin and aggregate fines
14. New alumosilicate fillers based on sedimentary rocks for asphalt concrete
15. Microstructure and mechanical properties of AISI 8620 steel processed by ECAP
16. Characterization and utilization of coconut fibers of the Caribbean
17. Thermal and kinetic analysis of the solidification of a near eutectic Al-Cu alloy
18. Autoclaved composites with nanostructured silica additive
19. The efficiency of SiO2 based materials in granulated artificial aggregates
20. Comparison of the annealing behavior of three cold rolled (Ti-bearing, Nb-bearing and V-bearing) HSLA steels
21. Cement composites reinforced with functionalized carbon nanotubes
22. Mathematical model of the melting of DRI in a slag melt
23. Characterization of all carbon composites reinforced with in situ synthesized carbon nanostructures
24. Fracture mechanisms in fiber reinforced polymer matrix composites
25. Synthesis and characterization of micro and nano Ba3-xKxHx(PO4)2 and Ba3-xNaxHx(PO4)2
26. The application of nano-structured silica based admixture in gypsum binders
27. Thermal effects on the physical properties of limestone from the Yucatan Peninsula
28. Sigma phase precipitation on welded SAF 2205 duplex stainless steels after isothermal heat treatment.
Editor
Hector A. Calderon, Instituto Politécnico Nacional, Mexico
Contributors
F. J. Baldenebro-Lopez, J. H. Castorena-Gonzalez, J. I. Velazquez-Dimas, J. E. Ledezma-Sillas, R. Martinez-Sanchez, J. M. Herrera-Ramirez, J. G. Carrillo, J. A. Moo-Tec, R. A. Gamboa, D. A. Pool Ventura, R. H. Cruz-Estrada, J. A. Delgado-Álvarez, J. G. Perea-Zurita, A. Antonio-Morales, C. González-Rivera, M. A. Ramírez-Argáez, Francisco Fernando Roberto Pereira, Maria Goretti Ferreira Coutinho, Bruno Moura Miranda, Carlos José de Araújo, Jackson de Brito Simões, Jorge Otubo, R. H. Rafful, B. J. Dzul, Nancy G. González-Canché, M. Hernández-Hernández, W. F. Cruz-Mendez, M. Vlasova, M. Kakazey, E. A. Juarez-Arellano, P. A. Márquez Aguilar, R. Guardian Tapia, V. Stetsenko, A. Bykov, E. Andrievskaya, A. Ragulya, Marcela Karmazínová, Jindrich J. Melcher, N. Koshukhova, Igor Zhernovsky, Konstantin Sobolev, E. F. Kuznetsova, G. M. Sobolev, Valeria Strokova, Mikhail Lebedev, Irina Potapova, Diana M. Marulanda, Jair G. Cortés, Marco A. Pérez, Gabriel García, Nadira Mathura, Duncan Cree, Ryan P. Mulligan, M. Morua, Victoria Nelubova, Alla Cherevatova, Nataliya Altynnik, Yulia Ogurtsova, Aleksey Maksakov, Marina Kozhukhova, R. Ordonez, A. J. DeArdo, C. Isaac Garcia, Sergey Petrunin, Viktor Vaganov, F. C. Robles Hernandez, H. A. Calderon, D. Barber, A. Okonkwo, R. Ordoñez Olivares, V. Hadjiev, C. Rodríguez, M. Hinojosa, J. Aldaco, A. Cázares, Sun Hwi Bang, Sam Chun, Adrian Highower, E. V. Voitovich, A. V. Cherevatova, H.-B. Fisher, W. S. Gónzalez-Gómez, J. May-Crespo, P. Quintana, A. May-Pat, F. Avilés, J. J. Alvarado-Gil, B. O. Ortega, A. F. Miranda Pérez, R. Sandström, I. Calliari, F. A. Reyes Valdés